[Free] 2018(June) Ensurepass Microsoft 70-246 Dumps with VCE and PDF 91-100

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-246
100% Free Download! 100% Pass Guaranteed!

Monitoring and Operating a Private Cloud with System Center 2012

Question No: 91 HOTSPOT – (Topic 8)

Your company help desk uses System Center 2012 Service Manager to manage and track problems.

You need to ensure that the manager of the help desk is notified automatically when a high-priority incident is updated.

What should you configure? To answer, select the appropriate configuration in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

http://technet.microsoft.com/en-us/library/hh524284.aspx

Question No: 92 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a server named Server1.

You install the management server role on Server1. You install the Operations Manager agent on DC1.

You run the Operations Manager console and discover the active alerts shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to resolve the active alerts. What should you do?

  1. On DC1, install MOMADAdmin.exe.

  2. On Server1, install OomADs.msi.

  3. On Server1, install MOMADAdmin.exe.

  4. On DC1, install OomADs.msi.

Answer: D Explanation:

http://technet.microsoft.com/en-us/library/hh230736.aspx

You can use MOMAgent.msi to deploy System Center 2012 – Operations Manager agents from the command line. Deploying agents from the command line is also referred to as a manual install When installing the AD Management pack, please remember to open up the properties for the Agent which the DC is installed and check quot;Allow this agent to act as a proxy and discover managed objects on other computers.quot; ALSO, please install the quot;OOMADs.msiquot; locally on the DC. What is this? This is the Active Directory Management Helper Object. It#39;s not well mentioned in documentation I have read up on.

Apparently the quot;AD Database and Log: The script ‘AD Database and Log’ failed to create object

‘McActiveDir.ActiveDirectory’.

The error returned was: ‘ActiveX component can’t create object’ (0x1AD)quot; error is a result of not having this component installed quot;The file which is installed automatically on a push

install via a Management Server can be copied and manually installed from the OpsMgr software … there is a HelpObjects folder where ooMADS.msi can be run from.quot;

Question No: 93 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

The network contains an Operations Manager infrastructure and a Virtual Machine Manager (VMM) infrastructure.

You implement a Microsoft SharePoint Server 2010 farm that is hosted on 10 virtual machines.

The company defines a service level agreement (SLA) for the farm#39;s availability of at least

99.9 percent uptime.

You need to ensure that the company#39;s compliance officer can identify whether the SLA requirement is met.

What should you do?

  1. Create a group, and then add all of the farm servers to the group. Create a Service Level Tracking object.

    Add a service level objective (SLO), and then set the goal to 99.9 percent.

  2. Create a group, and then add all of the farm servers to the group.

    Create a performance collection rule for each front-end Web server in the farm. Configure an alert if network availability falls below 99.9 percent.

  3. Create a distributed application that contains the servers and the services used by the farm.

    Create a Service Level Tracking object for the distributed application.

    Add a service level objective (SLO), and then set the goal to 99.9 percent.

  4. Create a distributed application that contains the servers and the services used by the farm.

Create a performance collection rule for each front-end Web server in the farm. Configure an alert if network availability falls below 99.9 percent.

Answer: C

Explanation: http://technet.microsoft.com/en-us/library/hh230719 http://technet.microsoft.com/en-us/library/hh457612.aspx

Question No: 94 – (Topic 8)

Your company has a private cloud that contains a System Center 2012 R2 infrastructure.

You run applications virtually by using Hyper-V hosts. Each application has a dedicated virtual machine on a Hyper-V host.

The Microsoft Monitoring Agent is deployed to all physical servers. Currently, all of the physical servers are monitored for memory, CPU, and disk space use.

You need to monitor the memory, CPU, and disk space use of each application server. What should you do?

  1. Deploy the Microsoft Monitoring Agent to each virtual machine.

  2. Configure a new notification subscription for each Hyper-V host.

  3. Deploy the Configuration Manager client to each virtual machine.

  4. Configure a new channel for each virtual machine.

Answer: A Explanation:

Bad question IMO. The thing to know here is that the SCOM Agent is now called the Microsoft Monitoring Agent. In order to monitor VMs, you need to install the SCOM agent (MMA) to the guest, not the host.

None of the other answers make sense anyways.

Please see http://www.server-log.com/blog/2013/12/2/installing-scom-agent-microsoft- monitoring-agent-fromsystem.html

Question No: 95 – (Topic 8)

Your network contains a single Active Directory domain. The domain contains the servers configured as shown in the following table.

Ensurepass 2018 PDF and VCE

The domain contains a user account named Account1. You plan to implement an update baseline in VMM.

From the Virtual Machine Manager console, you plan to add Server2 as an update server. VMM will use Account2 to manage WSUS. You need to identify the group to which you must add Account1 on Server2. The solution must use the principle of least privilege.

Which group should you identify?

  1. Administrators

  2. Power Users

  3. WSUS Administrators

  4. Distributed COM Users

Answer: C

Explanation: You must be a member of the local Administrators group or the WSUS Administrators group on the server on which WSUS is installed in order to use the WSUS console.

Question No: 96 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.

The network contains an Active Directory forest named adatum.com. Operations Manager monitors a server named Operations1.

Operations1 has a computer account in an organizational unit (OU) name ServerOU1.

You create a group named GP1 as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You create a rule named OMRule1 that generates an alert when an error is added to the Application log.

You target OMRule1 to GP1.

You discover that alerts fail to be generated when errors are added to the Application log on Operations1.

You need to ensure that an alert is generated when an error is added to the Application log on Operations1.

What should you modify?

  1. the target of OMRulel1

  2. the dynamic membership of GP1

  3. the category of OMRule1

  4. the explicit membership of GP1

Answer: B Explanation:

How does a rule get to an agent?

For any particular rule/monitor, OpsMgr will enumerate all instances of the target class and apply the rule to each.

If there are no instances of the target class on a particular agent, then the rule will do nothing.

It#39;s that simple.

If I can#39;t target groups, why are they listed when I select a target for a rule? Groups are

classes just like any other.

They#39;re singleton classes where the class and the instance are one and the same, but they are classes nonetheless which is why they show up in the list with all other classes.

There are really very few circumstances where you will target a rule at a group though. What if I do target a group?

You can apply a rule/monitor directly to a group, but it will execute against the group object itself.

OpsMgr will not enumerate members of the group and apply the rule to each.

Any rules targeted at groups will actually operate on the Root Management Server since groups have no host and unhosted objects are managed by the RMS.

How do I target some group of objects then?

To the specific question of how to get a particular rule/monitor to a subset of components, you have two basic options.

Let#39;s say for example, you have a particular subset of web sites that you need a particular rule to apply.

You could target that rule at the IIS 2003 Web Site class for example, but that would apply the rule to all instances of that class.

It would probably apply to sites that you didn#39;t want.

Option 1 would be to create a new class and target the rule at the class.

In the case of an IIS site, this would mean that you would need to go to the Authoring Console or raw XML and create a new class and discovery.

That#39;s a more advanced solution that most customers will do and probably overkill anyway. Option 2 is the create a rule target at the whole class and disable it.

Create a group with the sites you want and create an override for that group to enable your rule.

This might sound like a workaround, but it#39;s a completely valid solution. How do I know if I#39;m selecting the right target?

The easiest method to validate you are using a target that actually has instances is to use the Discovered

Inventory view in the Operations Console prior to creating your rule/monitor.

In the Actions pane is an option called quot;Change target type…quot; that will bring up the same Select a Target Type dialog box that you see when you select the target for a rule/monitor. This view will list all instances of the target class you select.

You can validate which agents have an instance of that class and how many instances

each has.

If there are no instances listed, then the rule isn#39;t going to do anything.

If there are instances, then you not only be confident that the rule/monitor will execute on the agent, but you can also view the properties of the instance that will be accessible to any rules/monitors targeted at it.

http://blogs.technet.com/b/brianwren/archive/2007/08/22/targeting-rules-and-monitors.aspx NOTE: The text below was copied from a duplicate question https://social.technet.microsoft.com/wiki/contents/articles/7205.operations-manager- dynamicgroup-examples.aspx

Operations Manager Dynamic Group Examples

In Operations Manager, groups are logical collections of objects, such as Windows-based computers, hard disks, or instances of Microsoft SQL Server.

Groups are populated by explicitly adding objects to the group or dynamically according to criteria you set.

For more information on the use of groups, see Creating and Managing Groups in the Operations Guide.

This article provides example of group definitions.

The examples describe the items to select in the Query Builder and the resulting formula:

Ensurepass 2018 PDF and VCE

Question No: 97 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1.

You have a server named Server2 that is a member of a workgroup. All servers run Windows Server 2012 R2.

Server1 has System Center 2012 R2 Operations Manager installed. DC1 is configured as an enterprise certification authority (CA). Server1 and DC1 are located on the internal network. Server2 is located on a perimeter network.

You need to monitor Server2 by using Operations Manager.

Which three actions should you perform? Each correct answer presents part of the solution.

  1. Request and install a certificate on Server2, and then import the certificate to Server1.

  2. Run the Discovery Wizard on Server1.

  3. Open port UDP 161 and UDP 162 on the firewall between the internal network and the perimeter network.

  4. Open port TCP 5723 on the firewall between the internal network and the perimeter network.

  5. Manually install the Microsoft Monitoring Agent on Server2.

  6. Request and install a certificate on Server1, and then import the certificate to Server2.

Answer: A,D,E

Question No: 98 – (Topic 8)

Your company has a private cloud that contains a System Center 2012 infrastructure. The network contains a Service Manager infrastructure and an Orchestrator infrastructure.

You plan to configure the private cloud to meet the following requirements:

->Integrate runbooks to Service Manager requests.

->Automate administration tasks by using runbooks.

->Provide end users with the ability to perform administrative tasks.

You need to configure the private cloud to meet the requirements.

What should you do from Service Manager?

  1. Register the Orchestrator Integration Packs.

  2. Select the sync folder for the Orchestrator connector.

  3. Create an Exception Management Workflow.

  4. Register a data source.

Answer: A

Question No: 99 – (Topic 8)

Your company has a private cloud that contains a System Center 2012 R2 infrastructure. You have a management server named Server1 that has Operations Manager installed.

You have a management server named Server2 that has Virtual Machine Manager (VMM) installed.

You need to monitor network devices by using Operations Manager. The solution must meet the following requirements:

->Only provide the health status of devices located on physical networks.

->Only include devices that are one hop away from a managed host.

->Only include devices that are part of the private cloud.

What should you use?

  1. The Fabric Health Dashboard

  2. The Microsoft System Center Advisor (SCA)

  3. The Network Vicinity Dashboard

  4. The Application Summary Dashboard

Answer: A

Question No: 100 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

An administrator installs a new tape drive on a server that has Data Protection Manager (DPM) installed.

You discover that the tape drive is unavailable from the DPM Administrator console. You verify that the tape drive is installed correctly on the DPM server.

You need to ensure that the tape drive is available from the DPM Administrator console. What should you do from the DPM Administrator console?

  1. From the Agents view, click Install.

  2. From the Disks tab, click Add.

  3. From the Protection view, click Tape.

  4. From the Libraries view, click Rescan.

Answer: D Explanation:

To configure tape libraries

In DPM Administrator Console, on the navigation bar click Management, and then click the Libraries tab.

In the Actions pane, click Rescan.

The Rescan operation might take several minutes to complete.

DPM will add any library jobs to the queue that began during the Rescan operation. If a library job is already in progress when the Rescan operation begins, the Rescan operation will fail.

Configuring Tape Libraries http://technet.microsoft.com/en-us/library/ff399665.aspx

100% Ensurepass Free Download!
Download Free Demo:70-246 Demo PDF
100% Ensurepass Free Guaranteed!
70-246 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.