[Free] 2018(May) EnsurePass Testinsides Microsoft 70-410 Dumps with VCE and PDF 191-200

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-410
100% Free Download! 100% Pass Guaranteed!

Installing and Configuring Windows Server 2012

Question No: 191 – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2.

A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that you can enable NTFS disk quotas for volume D. What should you do first?

  1. Install the File Server Resource Manager role service.

  2. Format volume D.

  3. Run the convert.exe command.

  4. Convert the disk to a dynamic disk.

Answer: B Explanation:

ReFS-formatted disks cannot use NTFS disk quotas, so the drive must be formatted as an NTFS partition

Question No: 192 – (Topic 2)

You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup.

On Server1, you add Server2 to Server Manager.

When you attempt to connect to Server2 from Server Manager, you receive the following error message: quot;Credentials not valid.quot;

You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1.

What should you do?

  1. On Server 2, run the Configure-SmRemoting cmdlet.

  2. On Server 1, run the Set-NetFirewallRule cmdlet.

  3. On Server 1, run the Set-Item cmdlet.

  4. On Server 2, install the Remote Server Administration Tools (RSAT).

Answer: C Explanation:

Since they are both workgroup members, server 2 will have to be added to server 1 as a trusted host

Question No: 193 – (Topic 2)

You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.

You need to add a graphical user interface (GUI) to Server1. Which tool should you use?

  1. The setup.exe command

  2. The dism.exe command

  3. The imagex.exe command

  4. The Add-WindowsPackage cmdlet

Answer: B Explanation:

The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM:

Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:ServerGui- Shell /featurename:Server-Gui-Mgmt

Question No: 194 – (Topic 2)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. Client computers run either Windows 7 or Windows 8.

All of the computer accounts of the client computers reside in an organizational unit (OU) named Clients. A Group Policy object (GPO) named GPO1 is linked to the Clients OU. All of the client computers use a DNS server named Server1.

You configure a server named Server2 as an ISATAP router. You add a host (A) record for ISATAP to the contoso.com DNS zone.

You need to ensure that the client computers locate the ISATAP router. What should you do?

  1. Run the Set-DnsServerGlobalQueryBlockList cmdlet on Server1.

  2. Configure the Network Options Group Policy preference of GPO1.

  3. Run the Add-DnsServerResourceRecord cmdlet on Server1.

  4. Configure the DNS Client Group Policy setting of GPO1.

Answer: A Explanation:

The Set-DnsServerGlobalQueryBlockList command will change the settings of a global query block list which you can use to ensure that client computers locate the ISATAP router.

Windows Server 2008 introduced a new feature, called “Global Query Block list”, which prevents some arbitrary machine from registering the DNS name of WPAD. This is a good security feature, as it prevents someone from just joining your network, and setting himself up as a proxy. The dynamic update feature of Domain Name System (DNS) makes it possible for DNS client computers to register and dynamically update their resource records with a DNS server whenever a client changes its network address or host name.

This reduces the need for manual administration of zone records. This convenience comes at a cost, however, because any authorized client can register any unused host name, even a host name that might have special significance for certain Applications. This can allow a malicious user to take over a special name and divert certain types of network traffic to that user’s computer. Two commonly deployed protocols are particularly vulnerable to this type of takeover: the Web Proxy Automatic Discovery Protocol (WPAD) and the Intra-site Automatic Tunnel Addressing Protocol (ISATAP). Even if a network does not deploy these protocols, clients that are configured to use them are vulnerable to the takeover that DNS dynamic update enables. Most commonly, ISATAP hosts construct their PRLs by using DNS to locate a host named isatap on the local domain. For example, if the local domain is corp.contoso.com, an ISATAP-enabled host queries DNS to obtain the IPv4 address of a host named isatap.corp.contoso.com. In its default configuration, the Windows Server 2008 DNS Server service maintains a list of names that, in effect, it ignores when it receives a query to resolve the name in any zone for which the server is authoritative.

Consequently, a malicious user can spoof an ISATAP router in much the same way as a malicious user can spoof a WPAD server: A malicious user can use dynamic update to register the user’s own computer as a counterfeit ISATAP router and then divert traffic between ISATAP-enabled computers on the network. The initial contents of the block list depend on whether WPAD or ISATAP is already deployed when you add the DNS server role to an existing Windows Server 2008 deployment or when you upgrade an earlier version of Windows Server running the DNS Server service. Add- DnsServerResourceRecord – The Add-DnsServerResourceRecordcmdlet adds a resource record for a Domain Name System (DNS) zone on a DNS server. You can add different

types of resource records. Use different switches for different record types. By using this cmdlet, you can change a value for a record, configure whether a record has a time stamp, whether any authenticated user can update a record with the same owner name, and change lookup timeout values, Windows Internet Name Service (WINS) cache settings, and replication settings. Set-DnsServerGlobalQueryBlockList – The Set- DnsServerGlobalQueryBlockListcmdlet changes settings of a global query block list on a Domain Name System (DNS) server. This cmdlet replaces all names in the list of names that the DNS server does not resolve with the names that you specify. If you need the DNS server to resolve names such as ISATAP and WPAD, remove these names from the list.

Web Proxy Automatic Discovery Protocol (WPAD) and Intra-site Automatic Tunnel Addressing Protocol (ISATAP) are two commonly deployed protocols that are particularly vulnerable to hijacking.

References:

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 4: Deploying domain controllers, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 254-256 http://technet.microsoft.com/en-us/library/jj649942(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649876(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649874.aspx

http://technet.microsoft.com/en-us/library/jj649909.aspx

Question No: 195 – (Topic 2)

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.

On DC2, you open Server Manager and you add Server1 as another server to manage.

From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that when you right-click Server1, you see the option to run the DHCP console.

What should you do?

  1. In the domain, add DC2 to the DHCP Administrators group.

  2. On Server1, install the Feature Administration Tools.

  3. On DC2 and Server1, run winrmquickconfig.

  4. On DC2, install the Role Administration Tools.

Answer: D

Reference: http://technet.microsoft.com/en-us/library/ee441255(v=ws.10).aspx

Question No: 196 HOTSPOT – (Topic 2)

The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The settings for Disk1.vhdx are configured as shown in the Disk1.vhdx exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

If you want to compact a differencing virtual hard disk or an undo disk, you must merge the changes to the parent disk and then compact the parent disk, if it is a dynamically expanding virtual hard disk.

You can compact a dynamically expanding virtual hard disk. You cannot compact any other type of virtual hard disk. However, you can convert a fixed-size virtual hard disk to a dynamically expanding virtual hard disk and then compact the disk. If you want to compact a differencing virtual hard disk or an undo disk, you must merge the changes to the parent disk and then compact the parent disk, if it is a dynamically expanding virtual hard disk.

Question No: 197 – (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2.

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.

You need to ensure that the feature can be installed on Server1. What should you do?

  1. Run the Add-AppxProvisionedPackage cmdlet.

  2. Disable User Account Control (UAC).

  3. Connect Server1 to the Internet.

  4. Remove the .NET Framework 4.5 Features feature.

Answer: C

Question No: 198 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You need to configure VM4 to track the CPU, memory, and network usage. What should you configure?

  1. NUMA topology

  2. Resource control

  3. Resource metering

  4. Virtual Machine Chimney

  5. The VLAN ID

  6. Processor Compatibility

  7. The startup order

  8. Automatic Start Action

  9. Integration Services

  10. Port mirroring

  11. Single-root I/O virtualization

Answer: C Explanation:

Metrics collected for each virtual machine using resource metering:

->Average CPU usage, measured in megahertz over a period of time.

->Average physical memory usage, measured in megabytes.

->Minimum memory usage (lowest amount of physical memory).

->Maximum memory usage (highest amount of physical memory).

->Maximum amount of disk space allocated to a virtual machine.

->Total incoming network traffic, measured in megabytes, for a virtual network adapter.

->Total outgoing network traffic, measured in megabytes, for a virtual network adapter

Reference: http://blogs.technet.com/b/meamcs/archive/2012/05/28/hyper-v-resource- metering-in-windows-server-2012-server-8-beta.aspx

Question No: 199 – (Topic 2)

Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2.

The IP configuration of each office is configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets.

Which command should you run?

A. route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1

B. route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1

C. route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0

D. route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1

Answer: B Explanation:

These parameters will allow communication with all the hosts.

Ensurepass 2018 PDF and VCE

References:

Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6 addressing, p.192, 196

Topic 3, Volume C

Question No: 200 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2 Service Pack 1 (SP1). One of the domain controllers is named DC1.

The network contains a member server named Server1 that runs Windows Server 2012 R2.

You need to promote Server1 to a domain controller by using install from media (IFM). What should you do first?

  1. Create a system state backup of DC1.

  2. Create IFM media on DC1.

  3. Upgrade DC1 to Windows Server 2012 R2.

  4. Run the Active Directory Domain Services Configuration Wizard on Server1.

  5. Run the Active Directory Domain Services Installation Wizard on DC1.

Answer: C Explanation:

A. Backs up system state data to be restored

  1. Only valid option. You could install ADDS role on Server 1 and run ADDS configuration wizard and add DC to existing domain

  2. Need to add ADDS role first

  3. Wrong server

Installation from media does not work across different operating system versions. In other words, you must use a Windows Server 2012 R2 domain controller to generate installation

media to use for another Windows Server 2012 R2 domain controller installation. We can use the Install from media (IFM) option to install an Additional Domain Controller in an existing domain is the best option such as a branch office scenario where network is slow, unreliable and costly.

IFM will minimize replication traffic during the installation because it uses restored backup files to populate the AD DS database. This will significantly reduce the amount of traffic copied over the WAN link.

Things to remember:

If you are deploying your first Domain Controller in the domain, you cannot use IFM.

The OS will need to match the IFM media. (If you create a 2008 R2 IFM, promote a 2008 R2 DC) If you are creating a DC that will be a Global Catalog Server, create your IFM on a Global Catalog Server.

If you are creating a DC that will be a DNS Server, create your IFM on a DNS Server. If you want to copy the SYSVOL, the DC on which you generate the installation media and the new DC must be at least running Windows Server 2008 with Service Pack 2 or Windows Server 2008 R2. Membership of the Domain Admins group is the minimum required to complete IFM.

100% Ensurepass Free Download!
Download Free Demo:70-410 Demo PDF
100% Ensurepass Free Guaranteed!
70-410 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.