Download New Updated (July) Cisco 352-001 Actual Test 161-170

Ensurepass

 

 

QUESTION 161

Your company plans to implement an Internet gateway router that is performing NAT. This same gateway will be terminating various IPsec tunnels to other remote sites. Which address type isappropriate for the ACL that will govern the sources of traffic entering the tunnel in the inside interface?

 

A.

inside local

B.

inside global

C.

outside local

D.

outside global

 

Correct Answer: B

 

 

QUESTION 162

Refer to the exhibit. You must ensure that both core A and core B devices have only the minimum information required for reaching the spoke routers yet maintain full reachability during network failures. Which of the following design solutions accomplishes these requirements?

&nbs

p;

clip_image001

 

A.

Route summarization, with specific route leaking on hubs A and B

B.

Route summarization, with GRE tunnel on hubs A and B

C.

Implement PfR enhancements on hubs A and B.

D.

Implement ODR for hub-to-spoke routing.

 

Correct Answer: B

 

 

QUESTION 163

Which two factors can significantly affect the OSPF network convergence time? (Choose two.)

 

A.

the tuning of OSPF LSA timers

B.

the number of OSPF routes

C.

the diameter of the OSPF network

D.

different processor capabilities of devices

 

Correct Answer: AD

 

QUESTION 164

What should be taken into consideration when designing IPsec networks using Authentication Header (AH)?

 

A.

NAT

B.

transform set

C.

crypto maps

D.

ISAKMP

 

Correct Answer: A

 

 

QUESTION 165

Refer to the exhibit. This Layer 2 ring has 10 VLANs with 1000 MAC addresses in each VLAN. Which protocol or mechanism provides the shortest traffic outage if the link marked with “X” fails?

 

clip_image002

 

A.

PVRST

B.

REP

C.

MST

D.

G.8031

E.

BFD

 

Correct Answer: B

 

 

QUESTION 166

What is the definition of the ITIL framework?

 

A.

an ISO framework that establishes a model for network management and contains guidelines for managing objects, the management database, and the application entity.

B.

a five-volume framework for service management that covers design, transition, and delivery of service, and from which the ISO 20000 was developed.

C.

a series of tools for process improvement that uses statistical methods to reduce defects in processes and manufacturing.

D.

a framework for enterprise architecture that provides a comprehensive approach for designing, planning, implementing, and governing an enterprise information architecture.

E.

a framework for enterprise IP Address Management (IPAM) based on the IANA trusted IP lease allocation scheme.

 

Correct Answer: B

 

 

QUESTION 167

Refer to the exhibit. A customer runs OSPF with Area 5 between its aggregation router and an internal router. When a network change occurs in the backbone, Area 5 starts having connectivity issues due to the SPF algorithm recalculating an abnormal number of times in Area 5. You are tasked to redesign this network to increase resiliency on the customer network with the caveat that Router B does not support the stub area. How can you accomplish this task?

 

clip_image004

 

A.

Set Area 5 to stubby at the ABR anyway.

B.

Increase the bandwidth on the connection between Router A and Router B.

C.

Turn on LSA throttling on all devices in Area 5.

D.

Implement LSA filtering on the ABR, allowing summary routes and preventing more specific routes into Area 5.

E.

Create a virtual link to Area 0 from Router B to the ABR.

 

Correct Answer: D

 

 

QUESTION 168

What are two benefits of using BFD for failure detection in the design of a network? (Choose two.)

 

A.

BFD can provide failure detection in less than one second.

B.

BFD can be used as a generic and consistent failure detection mechanism for EIGRP, IS-IS, and OSPF.

C.

BFD eliminates router protocol hello notification.

D.

BFD can be used for all types of network interfaces.

E.

BFD is independent of the network protocol.

 

Correct Answer: AB

 

QUESTION 169

You are working on a network design for Customer A. This design should consider fast convergence features, and it was agreed that BFD should be used for faster link-transition detection. Which three options apply to the use of the echo function in BFD? (Choose three.)

 

A.

It can be used with asynchronous mode.

B.

BFD control packets are not required.

C.

It can be enabled individually in each direction.

D.

It has the advantage of testing the forwarding path on the remote system.

E.

The rate of periodic transmission of BFD control packets should be increased.

 

Correct Answer: ACD

 

 

QUESTION 170

Two medium-sized companies recently merged and would like to share their two campus buildings as soon as possible. Employees should be able to sit and work in either building. If the IP addresses in the networks overlap, which virtualization technology could be deployed quickly to achieve the business objective?

 

A.

MPLS-VPN

B.

VRF-LITE

C.

EoMPLS

D.

L2TPv3

 

Correct Answer: B

 

Free VCE & PDF File for Cisco 352-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

< font face="Arial"> 

This entry was posted in Uncategorized by admin. Bookmark the permalink.

Comments are closed.