Recertification for MCSE: Messaging
Question No: 201 – (Topic 7)
Your company, Fabrikam Inc., has an Exchange Server 2013 organization. The organization that contains three servers named Server1, Server2, and Server3. Server1
and Server2 are members of a database availability group (DAG) named DAG1.
DAG1 contains two mailbox databases. All databases are active on Server1 and replicate to Server2.
You start an unplanned maintenance on Server1 and shut down Server1. You discover that the databases do not mount on Server2. You restart Server1 and the databases mount automatically on Server1.
You need to identify what prevents the databases from switching over successfully to Server2.
Which cmdlet should you run?
Question No: 202 HOTSPOT – (Topic 7)
Your company has an Exchange Server 2013 organization named contoso.com. All users run Microsoft Outlook 2010 or Outlook 2013.
The company recently acquired another company named A. Datum Corporation. All of the users at A. Datum run Linux-based computers and use a third-party IMAP client to access their email messages.
You configure IMAP over SSL to use the external URL of mail.contoso.com. You need to publish the IMAP settings to Outlook Web App.
What command should you run? (To answer, select the appropriate options in the answer area,)
Question No: 203 DRAG DROP – (Topic 7)
You have an Exchange Server 2013 organization.
You need to recommend a solution to ensure that users can access their mailbox by using IMAP4.
The solution must meet the following requirements:
->The users must be able to download their email messages from multiple devices.
->The users must be able to look up their SMTP server from Outlook Web App.
->All IMAP4 connections must be audited.
What should you recommend? To answer drag the appropriate recommendation to the correct requirement. Each recommendation may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Box 1: Run the Set-SendConnector Settings cmdlet. Box 2: Run the Set-MAP Settings cmdlet.
Box 3: Run the Set-ReceiveConnector Settings cmdlet.
Question No: 204 HOTSPOT – (Topic 7)
Your company has two main offices. One office is located in Atlanta and the other office is located in Washington.
The offices connect to each other by using a dedicated WAN link.
You have an Exchange Server 2013 organization that contains four servers. The servers are configured as shown in the following table.
The company opens a new office in New York. The New York office connects directly to the Washington office via a dedicated WAN link. You configure a separate Active Directory site for each office.
You discover poor response times when scheduling meetings and configuring Microsoft Outlook profiles from the client computers in the New York office.
You need to reduce the amount of time required to schedule meetings and to configure Outlook profiles from the computers in the New York office.
What command should you run? (To answer, select the appropriate options in the answer area.)
Question No: 205 – (Topic 7)
You have an Exchange Server 2010 organization.
You deploy a server that has Exchange Server 2013 installed.
You plan to install five additional servers that have Exchange Server 2013 installed. You are a member of the Organization Management management role group.
Your company hires an external IT consultant named Admin1.
The company#39;s security policy states that all external consultants must have the minimum number of required permissions on the network.
You need to ensure that Admin1 can install a server named EX2. The solution must meet the requirements of the security policy.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
Add Admin1 to the Exchange Server role group.
Create a new management role and a new role assignment policy.
Run setup and specify the/newprovisionectservenex2 parameter.
Add Admin1 to the Delegated Setup management role group.
Question No: 206 DRAG DROP – (Topic 8)
The security department implements a new firewall between the IP-PBX system and the servers in the Tampa office.
You discover that SIP sessions cannot be established between the IP-PBX and EX1.
You need to identify which ports must be opened between the IP-PBX and the Exchange Server 2013 servers.
Which ports should you identify?
To answer, drag the appropriate port or ports to the correct group of servers in the answer area. Each port or ports may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
You can configure the TCP port that#39;s used to listen for Session Initiation Protocol (SIP) requests on a Unified Messaging (UM) IP gateway. By default, when you create a UM IP gateway, the TCP SIP listening port number is set to 5060.
The Microsoft Exchange Unified Messaging service and the UM worker process use multiple Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) service ports to communicate with IP gateways.
The Microsoft Exchange Unified Messaging service and the UM worker process use Session Initiation Protocol (SIP) over TCP.
By default, the Microsoft Exchange Unified Messaging service listens on both TCP port 5060 in Unsecured mode and TCP port 5061 when mutual Transport Layer Security (mutual TLS) is used.
Each UM worker process that#39;s created listens on port 5065 and 5067 (unsecured) and 5066 and 5068 (secured).
But when an IP gateway or IP PBX sends Realtime Transport Protocol (RTP) traffic to the Speech Engine service worker process, the IP gateway or IP PBX will use a valid UDP port that ranges from 1024 through 65535.
Question No: 207 HOTSPOT – (Topic 8)
You need to ensure that the HR1 group can perform the tasks required to meet the technical requirements.
To which group should you add HR1?
To answer, select the appropriate group in the answer area.
Ensure that the members of a group named HR1 can search all of the mailboxes for sensitive email content.
If you want users to be able to use Microsoft Exchange Server 2013 In-Place eDiscovery, you must first authorize them by adding them to the Discovery Management role group.
Members of the Discovery Management role group have Full Access mailbox permissions for the Discovery mailbox that#39;s created by Exchange Setup.
Question No: 208 – (Topic 8)
You are evaluating the implementation of the planned static IP addresses for DAG1. You need to identify the appropriate IP addresses for DAG1.
Which two IP addresses should you identify? (Each correct answer presents part of the solution. Choose two.)
Answer: B,D Explanation:
/ Assign a static IP address to DAG1.
/ A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5, and EX6. DAG1 is configured to use DHCP to obtain an IP address.
/ Subnet 192.168.1.0/24 and subnet 192.168.10.0/24 are assigned as the MAPI network.
A DAG network is a collection of one or more subnets used for either replication traffic or MAPI traffic. Each DAG contains a maximum of one MAPI network and zero or more replication networks.
Question No: 209 – (Topic 8)
You need to recommend an Outlook protection rule solution to meet the technical requirements.
What should you recommend?
Create an Outlook protection rule and filter the rule based on the FromDepartment property. Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.
Create an Outlook protection rule and filter the rule based on the FromDepartment property. Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
Create an Outlook protection rule and filter the rule based on the SentTo property. Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
Create an Outlook protection rule and filter the rule based on the SentTo property. Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.
Answer: B Explanation:
Prevent the forwarding of email messages sent by users who have a value of Legal in their Department field.
Use FromDepartment property and do not allow the user to override.
Question No: 210 HOTSPOT – (Topic 8)
You plan to create two retention tags named Tag1 and Tag2. Tag1 will be used to move email messages to the Archive mailbox. Tag2 will be used to delete the email messages.
You need to identify which settings must be configured in the retention tags to meet the technical requirements.
How should you configure each retention tag?
To answer, configure the appropriate options for each retention tag setting in the answer area.
Implement an archiving policy that moves all of the email messages from the mailbox folders to an Archive mailbox after 30 days and permanently deletes all of the email messages after 365 days.
Both Tag Types should affect all email messages. For the first policy move the archive after 30 days. The second policy should permanently delete the messages after 365 days.
Dumps4cert ExamCollection Testking Lowest Price Guarantee Yes No No Up-to-Dated Yes No No Real Questions Yes No No Explanation Yes No No PDF VCE Yes No No Free VCE Simulator Yes No No Instant Download Yes No No