[Free] 2018(Aug) Ensurepass Microsoft 70-642 Dumps with VCE and PDF 161-170

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-642
100% Free Download! 100% Pass Guaranteed!

TS: Windows Server 2008 Network Infrastructure, Configuring

Question No: 161 – (Topic 2)

Your network contains a Network Policy Server (NPS) named Server1. You need to configure a network policy for a VLAN.

Which RADIUS attributes should you add?

  1. 路Login-LAT-Service

    路Login-LAT-Node

    路Login-LAT-Group

    路NAS-Identifier

  2. 路Tunnel-Assignment-ID

    路Tunnel-Preference

    路Tunnel-Client-Auth-ID

    路NAS-Port-Id

  3. 路Tunnel-Client-Endpt

    路Tunnel-Server-Endpt

    路NAS-Port-Type

    路Tunnel-Password

  4. 路Tunnel-Medium-Type

路Tunnel-Pvt-Group-ID

路Tunnel-Type

路Tunnel-Tag

Answer: D Explanation:

http://technet.microsoft.com/en-us/library/cc754422(v=ws.10).aspx

Question No: 162 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1).

You log on to Server1 by using an account named Admin1, and then you open Event Viewer as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that you can view all of the events in the Security log. What should you do?

  1. From the Local Group Policy Editor, set Retain old events to Enabled for the Security log.

  2. From a command prompt, run net localgroup /add quot;Event Log Readersquot; Admin1.

  3. From Event Viewer, right-click Security, and then click Refresh.

  4. From the Local Group Policy Editor, set Log access to Enabled for the Security log.

  5. From Event Viewer, right-click Security, and then click Clear Filter.

Answer: E

Question No: 163 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2008 R2. The disks on Server1 are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You run the Backup Once wizard and discover that the option for Full Server backup is unavailable. You need to ensure that you can run a full server backup of Server1.

What should you do?

  1. Take Disk 1 offline.

  2. Take Disk 2 offline.

  3. Run the Set-WBPolicy cmdlet.

  4. Run Windows Server Backup as an Administrator.

Answer: B

Question No: 164 – (Topic 2)

Your network contains a server named Server1. Server1 is configured as a BranchCache server. The cache is located at D:\Branchcache.

You need to remove all existing files and hashes from the cache. Which command should you run?

  1. hashgen.exe -d d:\branchcache

  2. net.exe stop PeerDistSvc amp; net.exe start PeerDistSvc

  3. netsh.exe branchcache flush

  4. rd.exe d:\branchcache /s /q

Answer: C Explanation:

netsh branchcache flush – deletes the contents of the local BranchCache cache all cache from branchcache

http://technet.microsoft.com/pt-br/library/dd979561(v=ws.10).aspx#BKMK_2

Question No: 165 – (Topic 2)

You need to document the following configurations of a server that runs Windows Server 2008 R2:

->System services

->Startup programs

->Hardware configuration

->Current CPU, network, disk, and memory utilization

Which command should you run?

  1. mrinfo.exe localhost

  2. msinfo32.exe

  3. perfmon.exe /report

  4. systeminfo.exe

Answer: C Explanation:

Perfmon – its capable of collecting all information that is required. Msinfo – can#39;t collect cpu information http://technet.microsoft.com/en-us/library/cc766130.aspx

Question No: 166 – (Topic 2)

Your network contains an Active Directory forest. The forest contains three domain trees. Each domain tree contains multiple domains.

You have an Active Directory-integrated DNS zone.

You install a Web server named Web1. All of the users in the company will use Web1. You need to ensure that the users can access Web1 by using the URL http://web1. You want to achieve this goal by using the minimum amount of administrative effort.

What should you do?

  1. Configure a GlobalNames zone and add a Host (A) resource record for Web1.

  2. Create an Alias (CNAME) resource record for Web1 in the forest root domain zone.

  3. Create a reverse lookup zone and add an Alias (CNAME) resource record for Web1.

  4. Create a Host Information (HINFO) resource record for Web1 in the forest root domain zone.

Answer: B Explanation:

Create an Alias (CNAME) resource record for Web1 in the forest root domain zone. Because the root zone is already AD-integrated

In GLOBALNAMES zone you only add alias (cname) records not host (A) records.

Question No: 167 – (Topic 2)

Your network contains an Active Directory forest. The functional level of the forest is Windows Server 2008 R2.

You plan to deploy DirectAccess.

You need to configure the DNS servers on your network to support DirectAccess. What should you do?

  1. Modify the GlobalQueryBlockList registry key and restart the DNS Server service.

  2. Modify the EnableGlobalNamesSupport registry key and restart the DNS Server service.

  3. Create a trust anchor that uses a certificate issued by an internal certification authority (CA).

  4. Create a trust anchor that uses a certificate issued by a publicly trusted certification authority (CA).

    Answer: A Explanation:

    To remove ISATAP from the DNS global query block list

    1. Click Start, click All Programs, click Accessories, rightclick Command Prompt, and then click Run as administrator.

    2. In the Command Prompt window, type dnscmd /config / globalqueryblocklist wpad, and then press ENTER.

    3. Close the Command Prompt window.

OR

To remove ISATAP from the DNS global query block list on a DNS server 1- Click Start, type regedit.exe, and then press ENTER.

  1. In the console tree, open Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS

    \Parameters.

  2. In the contents pane, double-click the GlobalQueryBlockList value.

  3. In the Edit Multi-String dialog box, remove the name ISATAP from the list, and then click OK.

  4. Start a command prompt as an administrator.

  5. In the Command Prompt window, run the following commands: net stop dns

net start dns

http://technet.microsoft.com/en-us/library/ee649158(v=ws.10).aspx

Question No: 168 – (Topic 2)

Your company is implementing Network Access Protection (NAP) with DHCP enforcement. You need to define which network resources non-compliant client computers can access. What should you configure?

  1. remediation server groups

  2. health policies

  3. connection request policies

  4. system health validators (SHVs)

Answer: A Explanation:

Remediation server groups are used to specify servers that are available to noncompliant Network Access Protection (NAP) clients for the purpose of remediating their health state to comply with health requirements.

The type of remediation servers that are required depend on your health requirements and network access methods.

http://technet.microsoft.com/en-us/library/dd759158.aspx

Question No: 169 – (Topic 2)

Your network contains an Active Directory domain. The domain contains a Windows Server Update Services (WSUS) server named Server1. A Group Policy object (GPO) named GPO1 configures all computers in the domain to use Server1 for Windows Update.

You add a new Windows 7 computer named Computer1 to the domain.

From the Update Services console, you discover that Computer1 is not listed as a member of any computer groups.

You verify that GPO1 is applied to Computer1.

You need to ensure that Computer1 is available in the Update Services console. What should you do?

  1. On Computer1, run wuauclt.exe /detectnow.

  2. On Computer1, run wuauclt.exe /reportnow.

  3. On Server1, run wsusutil.exe reset.

  4. On Server1, run wsusutil.exe listinactiveapprovals.

Answer: A Explanation:

Automatic Updates Behavior Using Command-line Options There are two documented command-line options used for manipulating Automatic Updates behavior. These options are meant to be run from a command prompt. They are helpful for testing and troubleshooting client computers. For comprehensive troubleshooting information for problems with both the WSUS server and client computers, see quot;Microsoft Windows Server Update Services Operations Guide.quot;

Detectnow Option Because waiting for detection to start can be a time-consuming process, an option has been added to allow you to initiate detection right away. On one of the computers with the new Automatic Update client installed, run the following command at the command prompt:

wuauclt.exe /detectnow Resetauthorization Option

WSUS uses a cookie on client computers to store various types of information, including computer group membership when client-side targeting is used. By default this cookie

expires an hour after WSUS creates it. If you are using client-side targeting and change group membership, use this option in combination with detectnow to expire the cookie, initiate detection, and have WSUS update computer group membership.

Note that when combining parameters, you can use them only in the order specified as follows:

wuauclt.exe /resetauthorization /detectnow http://technet.microsoft.com/en-us/library/cc708617(v=WS.10).aspx

Question No: 170 – (Topic 2)

Your network contains a Windows Server Update Services (WSUS) Server infrastructure that has three servers named WSUS1, WSUS2, and WSUS3.

WSUS2 is a downstream replica server of WSUS1. WSUS3 is a downstream replica server of WSUS2.

You need to ensure that the Update Services console on WSUS2 only displays computers that receive updates from WSUS2.

What should you configure on WSUS2?

  1. downstream servers

  2. Personalization

  3. reporting rollup

  4. synchronizations

Answer: B

100% Ensurepass Free Download!
70-642 PDF
100% Ensurepass Free Guaranteed!
70-642 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.