[Free] 2018(Aug) Ensurepass Microsoft 70-680 Dumps with VCE and PDF 21-30

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!

TS: Windows 7, Configuring

Question No: 21 – (Topic 1)

You have a stand-alone computer that runs Windows 7.

You open Windows Update as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that you can manually change the Windows Update settings on the computer.

What should you do?

  1. Log on to Windows 7 as member of the Administrators group.

  2. From the local Group Policy, modify the Windows Update settings.

  3. Right-click Windows Update and select Run as administrator.

  4. Right-click the command prompt, select Run as administrator, and then run Wuapp.exe.

    Answer: B Explanation:

    Configuring Automatic Updates by using local Group Policy

    1. Click Start, and then click Run.

    2. Type gpedit.msc, and then click OK.

    3. Expand Computer Configuration.

    4. Right-click Administrative Templates, and then click Add/Remove Templates.

    5. Click Add, click Wuau.adm in the Windows\Inf folder, and then click Open.

    6. Click Close.

    7. Under Computer Configuration, expand Administrative Templates, expand Windows Components, and then expand Windows Update.

      Ensurepass 2018 PDF and VCE

      Question No: 22 – (Topic 1)

      You have a computer that runs Windows 7.

      You need to configure the computer to meet the following requirements:

      ->Generate a new security ID (SID) when the computer starts.

      ->Ensure that the Welcome screen appears when the computer starts.

      What should you do?

      1. Run Sysprep.exe /oobe /generalize.

      2. Run Sysprep.exe /audit /generalize.

      3. Run Msconfig.exe and select Selective startup.

      4. Run Msconfig.exe and select Diagnostic startup.

Answer: A Explanation:

To prepare the reference computer for the user, you use the Sysprep utility with the

/generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart. Open an elevated command prompt on the reference computer and run the following command: c:\windows\system32\sysprep\sysprep.exe /oobe /generalize

/shutdown Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged./generalize Prepares the Windows installation to be imaged. If you specify this option, all unique system information is removed from the Windows installation. The SID is reset, system restore points are cleared, and event logs are deleted. The next time the computer starts, the specialize configuration pass runs. A new SID is created, and the clock for Windows activation resets (unless the clock has already been reset three times)./oobeRestarts the computer in Windows Welcome mode. Windows Welcome enables users to customize their Windows 7 operating system, create user accounts, and name the computer. Any settings in the oobeSystem configuration pass in an answer file are processed immediately before Windows Welcome starts.

Question No: 23 – (Topic 1)

Which of the following is not a minimum requirement to install Windows 7?

  1. 1 GHz or faster 32-bit (x86) or a 64-bit (x64) processor

  2. 4GB RAM (32-bit)/2 GB RAM (64-bit)

  3. 16 GB available disk space (32-bit)/20 GB (64-bit)

  4. DirectX 9 graphics processor with WDDM 1.0 or higher driver.

Answer: B

Question No: 24 – (Topic 1)

Your network contains a wireless access point. You have a computer that runs Windows 7. The computer connects to the wireless access point.

You disable Service Set Identifier (SSID) broadcasts on the wireless access point.

You discover that you are now unable to connect to the wireless access point from the Windows 7 computer.

You need to ensure that the computer can connect to the wireless access point. What should you do?

  1. From Credential Manager, modify the generic credentials.

  2. From Credential Manager, modify the Windows credentials.

  3. From Network and Sharing Center, turn on Network discovery.

  4. From Network and Sharing Center, modify the wireless network connection settings.

Answer: D Explanation:

Wireless Network Connection settingsTo connect to a wireless network that does not broadcast its SSID, you need to know details such as the network name and security type. In Network And Sharing Center, you click Set Up A Connection Or Network, click Manually Connect To A Wireless Network, and click Next. You are prompted for the network name and security type and (if appropriate) encryption type and security key. Alternatively, you can open an elevated command prompt and enter a command with the following syntax: netsh wlan connect name=lt;profile_namegt; ssid-lt;network_ssidgt; [interface=lt;interface_namegt;] (Since the computer has previously been connected, just modify the settings.)NOT Network DiscoveryNetwork Discovery allows the client running Windows 7 to locate other computers and devices on the network. It also makes the client visible to other computers on the network. Disabling Network Discovery does not turn off other forms of sharing.NOT Credential ManagerCredential Manager stores logon user name and passwords for network resources, including file servers, Web sites, and terminal services servers. Credential Manager stores user name and password data in the Windows Vault. You can back up the Windows Vault and restore it on other computers running Windows 7 as a method of transferring saved credentials from one computer to another.

Although Credential Manager can be used to back up some forms of digital certificates, it cannot be used to back up and restore the self-signed Encrypting File System (EFS) certificates that Windows 7 generates automatically when you encrypt a file. For this reason, you must back up EFS certificates using other tools. You will learn about backing up EFS certificates later in this lesson.

Question No: 25 – (Topic 1)

Which of the following is used to control when the security pop-up notifications are used?

  1. Security Control Manager

  2. User Account Control

  3. User Access Control Panel

  4. Notification Control Settings Manager

Answer: B

Question No: 26 – (Topic 1)

You have a computer that runs Windows 7.

The IPv6 address of the computer is configured automatically. You need to identify the IPV6 address of the computer.

What should you do?

  1. At the command prompt, run Netstat.

  2. At the command prompt run Net config.

  3. From the network connection status, click Details.

  4. From network connection properties, select Internet Protocol Version 6 (TCP/IPv6) and click Properties.

Answer: C

Explanation: You can view a list of all the connection interfaces (wired and wireless) on a computer by opening Network And Sharing Center and clicking Change Adapter Settings. You can right-click any network connection and select Status. If you click Details on the Local Area Connection Status dialog box, you access the Network Connection Details information box. You can configure wireless connection behavior by clicking Change Adapter Settings in Network And Sharing Center, right-clicking your wireless adapter, and clicking Status. Clicking Details on the Status dialog box displays the adapter configuration.

Ensurepass 2018 PDF and VCE

Question No: 27 – (Topic 1)

You have a computer that runs Windows 7.

You need to prevent Internet Explorer from saving any data during a browsing session. What should you do?

  1. Disable the BranchCache service.

  2. Modify the InPrivate Blocking list.

  3. Open an InPrivate Browsing session.

  4. Modify the security settings for the Internet zone.

Answer: C Explanation:

InPrivate Mode consists of two technologies: InPrivate Filtering and InPrivate Browsing. Both InPrivate Filtering and InPrivate Browsing are privacy technologies that restrict the amount of information available about a user’s browsing session. InPrivate Browsing restricts what data is recorded by the browser, and InPrivate Filtering is used to restrict what information about a browsing session can be tracked by external third parties.

Question No: 28 – (Topic 1)

Which of the following must you download from Microsoft#39;s Web site to obtain USMT 4.0?

  1. Windows Anytime Upgrade

  2. Windows Upgrade Advisor

  3. WAIK

  4. Microsoft Application Compatibility Toolkit

Answer: C Explanation:

User State Migration Tool

USMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState.

Question No: 29 – (Topic 1)

You work in an international company which is named Wiikigo. Before entering this company, you have two years of experience in the IT field, as well as experience implementing and administering any Windows client operating system in a networked environment.

You are professional in installing, upgrading and migrating to Windows 7, deploying Windows 7, and configuring Hardware and Applications and son on.

You have a workgroup which contains five computers. Windows 7 is run by the computers. A computer named C01 has video and audio files.

You have to share C01s video and audio files on the network. What should you do? (Choose more than one)

  1. Connect a removable drive and enable BitLocker To Go.

  2. A HomeGroup should be created.

  3. The files should be moved to a Media Library.

  4. All BranchCache rules should be enabled in Windows Firewall.

Answer: B,C

Question No: 30 – (Topic 1)

You have a computer that runs Windows Vista Service Pack 2 (SP2). You need to upgrade the computer to Windows 7.

What should you do?

  1. Start the computer from the Windows 7 installation media and select the Upgrade option.

  2. Start the computer from the Windows 7 installation media and select the Custom (advanced) option.

  3. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Upgrade option.

  4. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Custom (advanced) option.

Answer: C

Explanation:

Upgrading Windows Vista to Windows 7 instructionsAccess the Windows 7 installation source and double-click Setup.exe. When prompted by User Account Control, click Allow. This loads the Install Windows page. Click Install Now.Other NotesYou can upgrade computers running Windows Vista to Windows 7. When you upgrade from Windows Vista to Windows 7, all documents, settings, applications, and user accounts that existed on the computer running Windows Vista are available when the upgrade is finished. The advantage to an upgrade is that it allows you to keep the current application configuration. When you perform a migration, you need to reinstall the user’s applications on the new computer. As mentioned previously, this can be problematic in organizations that are not careful about keeping track of which specific set of applications are installed on each user’s computer. Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should run the Windows 7 Upgrade Advisor. The Windows 7 Upgrade Advisor is an application that you can download from Microsoft’s Web site that will inform you if Windows 7 supports a computer running the current hardware and software configuration of Windows Vista. Prior to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you want to use with Windows 7, such as printers, scanners, and cameras, are connected to the computer. The Upgrade Advisor generates a report that informs you of which applications and devices are known to have problems with Windows

  1. A similar compatibility report is generated during the upgrade process, but the version created by the Windows 7 Upgrade Advisor is more likely to be up to date.

    100% Ensurepass Free Download!
    70-680 PDF
    100% Ensurepass Free Guaranteed!
    70-680 Dumps

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.