Recertification for MCSE: Private Cloud
Question No: 171 – (Topic 9)
You need to identify which UDP port or ports must be opened on any of the firewalls
between Server5 and all of the subnets in the data center. The solution must minimize the number of ports opened on the firewall.
Which port or ports should you identify? (Each correct answer presents part of the solution. Choose all that apply.)
69 C. 389 D. 3389 E. 4010 F. 4011
Answer: A,B,F Explanation: References:
Ports required by Configuration Manager: 67 and 68, 69, 4011 http://technet.microsoft.com/en-us/library/bb632618.aspx Dynamic Host Configuration Protocol (DHCP): 67 and 68 Trivial File Transfer Protocol (TFTP) : 69
Boot Information Negotiation Layer (BINL): 4011
Question No: 172 – (Topic 9)
You need to recommend a deployment topology for the PKI. The deployment topology must meet the cloud requirements.
What should you recommend? (More than one answer choice may achieve the goal. Select the BEST answer.)
An online enterprise root certification authority (CA) only
An online standalone root certification authority (CA) only
An offline root certification authority (CA) and an online enterprise subordinate CA
An offline root certification authority (CA) and an online standalone subordinate CA
Question No: 173 DRAG DROP – (Topic 9)
You need to configure the storage fabric to support the deployment of the virtual machines. The solution must meet the cloud requirements.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Box 1: Configure the iSCSI initiator
Box 2: Run the Add Storage Devices Wizard. Box 3: Allocate storage to a host group.
We configure the iSCSI initiator in VMM to connect to the SAN.
Then we run the Add Storage Devices Wizard to add the SAN as a storage device. Then we can assign the storage to host groups (not directly to the hosts).
/ Stores all virtual machines on the SAN only.
/ Uses SAN copy to provision the virtual machines.
The following list describes the workflow used to discover, classify, and assign storage using VMM:
/ After configuring storage and assigning to host groups, you can assign the storage to Hyper-V hosts and clusters as shared (Cluster Shared Volume) or available storage. Note that all nodes in the cluster should have access to the storage array using host bus adapters (HBA) or iSCSI. If you allocated a storage pool to a host group, you can create and optionally assign logical units directly from the Properties dialog box of a host or host cluster. If the storage array supports iSCSI host connectivity, you can create iSCSI sessions to the storage array from the Properties dialog box of a host.
/ In addition to discovery and management of iSCSI arrays with static targets, System Center 2012 SP1 adds support for the discovery and management of iSCSI target arrays that support dynamic and manual targets (for example Starwind, HP P2000, HP Lefthand, Dell EqualLogic, and Microsoft iSCSI Software Target).
You can use host groups to group virtual machine hosts in meaningful ways, often based on physical site location and resource allocation.
Storage allocation – You can allocate available storage pools and LUNs to defined host groups that can represent business groups, locations and so on. Resources typically need to be allocated on the host group level before they can be assigned to hosts.
You can create a private cloud from resources in host groups. When you create a private cloud, you select which host groups will be part of the private cloud. You can then allocate all or some of the resources from the selected host groups to the private cloud.
Question No: 174 – (Topic 9)
You need to identify which server or servers can be deployed as a Hyper-V host by using System Center 2012 -Virtual Machine Manager (VMM).
Which server or servers should you identify? (Each correct answer presents part of the solution. Choose all that apply.)
Answer: A,C,D Explanation:
To support discovery, the physical computer must have a baseboard management controller (BMC) installed that enables out-of-band management.
Question No: 175 – (Topic 9)
You need to recommend a solution to meet the technical requirements for the web tier of App1.
What should you include in the recommendation? (More than one answer choice may achieve the goal. Select the BEST answer.)
Network Load Balancing (NLB)
Multipath I/O (MPIO)
DNS round robin
Network Load Balancing (NLB) provides scalability and at the same time helps increase availability of Web-based services
Question No: 176 – (Topic 9)
You need to identify which components must be created to meet the App1 deployment requirements.
Which components should you identify?
A service template and a service request template
A guest operating system profile and a virtual IP (VIP) template
A guest operating system profile and a service request template
A service template and a virtual IP (VIP) template
Question No: 177 – (Topic 9)
You need to recommend the configuration settings for the SQL Server instance that will host the App Controller database. The solution must support the planned changes.
What should you include in the recommendation?
Change the database collation.
Enable case sensitivity.
Disable full-text search.
Install the SQL Server Reporting Services (SSRS).
To support Simplified Chinese change MS SQL Collation
Question No: 178 – (Topic 9)
You need to recommend a solution for the management packs. The solution must meet the cloud requirements.
Export the management packs, and then modify the settings of the management packs. Seal the management packs, and then import the management packs.
Export the management packs, modify the settings of the management packs, and then import the unsealed management packs.
Unseal the management packs, and then modify the settings of the management packs.
Create a new management pack that contains overrides.
Question No: 179 – (Topic 9)
You need to identify which Microsoft SharePoint product or products support the planned deployment of the System Center 2012 Service Manager Self-Service Portal.
Which product or products should you identify? (Each correct answer presents a complete solution. Choose all that apply.)
SharePoint 2010 for Internet Sites Enterprise
SharePoint Foundation 2010
SharePoint Server 2010
SharePoint Server 2013
Answer: A,B,C Explanation: References:
One of the following versions of Microsoft SharePoint:
Microsoft SharePoint Foundation 2010 Microsoft SharePoint Server 2010
Microsoft SharePoint 2010 for Internet Sites Enterprise
Question No: 180 HOTSPOT – (Topic 9)
You need to configure the Hyper-V hosts to meet the cloud requirements.
From which node should you perform the configuration? (To answer, select the appropriate node in the answer area.)
quot;Uses SAN copy to provision the virtual machinesquot; “Stores all virtual machines on the SAN only”
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|