Installing and Configuring Windows Server 2012
Question No: 151 – (Topic 2)
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1. What should you create on Server1?
A scope option
Answer: B Explanation:
For clients that require a constant IP address
Filter to exclude MAC address of Server3
Range of allowed IP’s to be assigned
Exclude range of IP’s
MAC address based filtering ensure that only a known set of devices in the system are able to obtain an IPAddress from the DHCP Reservation and Exclusion, two incredibly different concepts. An exclusion is an address or range of addresses taken from a DHCP scope that the DHCP server is not allowed to hand out. For example, if you have set a DHCP server to exclude the address range 192.168.0.1-192.168.0.10 then the only way a computer on your network would get an address of 192.168.0.4 would be if you assigned it statically on that machine. This is because DHCP knows NOT to give this range of IP addresses out.
A reservation is a specific IP addresses that is tied to a certain device through its MAC address. For example, if we have a workstation on the network that requires a certain IP address, but we don’t want to go through to trouble of assigning it statically, then we can create a reservation for it. So if the MAC address of the NIC on the computer is AA-BB- 00FF-CC-AA and we want it to maintain the IP address of 192.168.0.100 then we would
create a DHCP reservation under that particular scope saying that the IP address 192.168.0.100 is reserved only for the MAC address AA-BB-00-FF-CC-AA.
Question No: 152 – (Topic 2)
You have a server that runs a Server Core installation of Windows Server 2012 R2. You need to change the DNS server used by IPv6.
What should you do?
From Sconfig, configure the Network Settings.
Run the sc.exe command and specify the config parameter.
From Windows PowerShell, run the Set-NetIpv6Protocol cmdlet.
From Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.
Answer: D Explanation:
The Set-DnsClientServerAddresscmdlet sets one or more IP addresses for DNS servers associated with an interface. This cmdlet statically adds DNS server addresses to the interface. If this cmdlet is used to add DNS servers to the interface, then the DNS servers will override any DHCP configuration for that interface.
PS C:\gt; Set-DnsClientServerAddress -InterfaceIndex 12 -ServerAddresses quot;10.0.0.1quot;,quot;10.0.0.2quot;)
Question No: 153 HOTSPOT – (Topic 2)
Your network contains an Active Directory forest. The forest contains two domains named Domain1 and Domain2.
Domain1 contains a file server named Server1. Server1 has a shared folder named Share1.
Domain2 contains 50 users who require access to Share1.
You need to create groups in each domain to meet the following requirements:
->In Domain1, create a group named Group1. Group1 must be granted access to Share1.
->In Domain2, create a group named Group2. Group2 must contain the user
accounts of the 50 users.
->Permission to Share1 must only be assigned directly to Group1.
Which type of groups should you create and which group nesting strategy should you use? To answer, select the appropriate configuration in the answer area.
Any group, whether it is a security group or a distribution group, is characterized by a scope that identifies the extent to which the group is applied in the domain tree or forest. The boundary, or reach, of a group scope is also determined by the domain functional level setting of the domain in which it resides. There are three group scopes:
universal, global, and domain local.
Security groups in a nesting strategy with global scope can have only accounts as their members. And Security groups with domain local scope can have other groups with global scope and accounts as their members.
Question No: 154 – (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non- administrators.
Which tool should you use?
Group Policy Object Editor
Group Policy Management
Group Policy Management Editor
Answer: A Explanation:
Once you create a GPO, you can open it in the Group Policy Management Editor and configure the GPO’s policies, specifically those settings that target the non-administrators. In this scenario however, you still need to configure the Group Policy thus you would need the GPO Editor.
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, Lesson 1: Planning, implementing and managing group policy, p. 475
Question No: 155 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Hyper-V server role installed. The domain contains a virtual machine named VM1. A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe. Which virtual machine setting should you configure?
Answer: C Explanation:
This option connects the virtual serial port to a Windows named pipe on the host operating system or a computer on the network. A named pipe is a portion of memory that can be used by one process to pass information to another process, so that the output of one is the input of the other. The second process can be local (on the same computer as the first) or remote (on a networked computer). For example, a local named pipe path could be
\\.\pipe\mypipename. Named pipes can be used to create a virtual null modem cable between two virtual machines, or between a virtual machine and a debugging program on the host operating system that supports the use of named pipes.
By connecting two virtual serial ports to the same named pipe, you can create a virtual null modem cable connection. Named pipes are useful for debugging or for any program that requires a null modem connection.
Named pipes can be used to connect to a virtual machine by configuring COM 1. References:
Question No: 156 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share
– Advanced option.
You need to ensure that you can use SMB Share – Advanced to create the new share. What should you do on Server1 before you run the New Share Wizard?
Configure the Advanced system settings.
Run the Install-WindowsFeature cmdlet.
Run the Set-SmbShare cmdlet.
Install the Share and Storage Management tool.
Answer: B Explanation:
Install-WindowsFeature will install one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features in Windows Server 2008 R2.
Question No: 157 – (Topic 2)
You have a new server named Server1 that runs Windows Server 2012 R2. Server1 has two dual-core processors and 32 GB of RAM.
You install the Hyper-V server role on Server1.
You create two virtual machines on Server1 that each have 8 GB of memory.
You need to minimize the amount of time it takes for both virtual machines to access
What should you configure on each virtual machine?
Answer: D Explanation:
Windows Server 2012 introduced support for projecting a virtual NUMA topology into Hyper-V virtual machines. This capability can help improve the performance of workloads running on virtual machines that are configured with large amounts of memory.
Question No: 158 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?
Create a primary zone named “root”.
Create a primary zone named quot;GlobalNamesquot;.
Create a forwarder that points to 169.254.0.1.
Create a primary zone named “.”.
Question No: 159 – (Topic 2)
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures. The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs.
Which file system should you use?
Answer: C Explanation:
The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.
Question No: 160 HOTSPOT – (Topic 2)
Your network contains an Active Directory domain named contoso.com.
You need to identify whether the Company attribute replicates to the global catalog.
Which part of the Active Directory partition should you view?
To answer, select the appropriate Active Directory object in the answer area.
Schema -Contains the Schema container, which stores class and attribute definitions for all existing and possible Active Directory objects in cn=schema,cn=configuration,dc= forestRootDomain. Updates to this container are replicated to all domain controllers in the forest. You can view the contents of the Schema container in the Active Directory Schema console.
An Active Directory Lightweight Directory Services (AD LDS) schema defines, using object classes and attributes, the types of objects and data that can be created and stored in an AD LDS directory. The schema can be extended with new classes and attributes, either by administrators or by the applications themselves. In addition, unneeded schema classes and attributes can be deactivated.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|