[Free] Download New Updated (August 2016) Cisco 300-360 Real Exam 31-40

Ensurepass

QUESTION 31

You have a customer that is building a new campus of four 3-story buildings that you have just completed the site survey for. The customer is interested in the mount of rack space they will need to allocate in either the building MDF or in the data center for controllers. Each building is going to require 75 APs to support voice and data. How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the easiest management?

 

A.

Use the centralized deployment method in the data center with the N + N redundancy method.

B.

Use the centralized deployment method in the data center with the N + 1 redundancy method

C.

Use the centralized deployment method in the data center with the 1 + 1 redundancy method and client SSO.

D.

Use the distributed deployment method in each building MDF with the N + 1 redundancy method.

E.

Use the distributed deployment method in each building MDF with the N + N + 1 redundancy method.

F.

Use the distributed deployment method in each building MDF with the N + N redundancy method.

 

Correct Answer: C

 

 

QUESTION 32

When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB. When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to represent the impact the glass wall will have on the RF signal in the facility?

 

A.

heavy door

B.

thick wall

C.

glass

D.

light wall

 

Correct Answer: D

Explanation:

http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html Table 6-4

 

 

QUESTION 33

Cisco 7925G phones are experiencing intermittent connectivity issues. The wireless survey reveals that the facility has no current coverage holes. The radios on the 2.4GHz channel have all been statically set to power level 1. Which two reasons could explain why the phones are having issues on this wireless network? (Choose two.)

 

A.

The phones are experiencing excessive co-channel interference.

B.

The phones only operate on the 2.4 GHz band when the power level is above 25 mW.

C.

The phones are not transmitting at the same power levels as the access points.

D.

The phones are experiencing delays of less than 30 ms within their coverage cell.

E.

The phones are receiving greater than -67 dBm RSSI on the 2.4 GHz band.

 

Correct Answer: AC

 

 

QUESTION 34

As part of a wireless site survey in a hospital, an engineer needs to identify potential Layer 1 interferers. In which three areas is the engineer most likely expect to find sources of 2.4 GHz and 5 GHz RF noise? (Choose three.)

 

A.

emergency room

B.

magnetic resonance imaging

C.

laboratory

D.

X-ray radiography

E.

Gamma Knife radiation treatment

F.

kitchen

 

Correct Answer: ACF

 

 

QUESTION 35

What is a common cause for signal attenuation?

 

A.

Cinder block wall

B.

Office window

C.

Metal door

D.

Glass wall

 

Correct Answer: C

 

 

QUESTION 36

An engineer is performing a predictive wireless design for a Parts Distribution Center, which requires data and location services. Which three requirements are inputs to the design? (Choose three.)

 

A.

access points with directional antennas

B.

continuous -67 dBm coverage from one access point

C.

overlapping -75 dBm coverage from three access points

D.

overlapping -67 dBm coverage from two access points

E.

access points in IPS mode

F.

continuous -72 dBm coverage from one access point

G.

access points in corners and along perimeters

 

Correct Answer: BCG

Explanation:

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich5.html

 

 

QUESTION 37

Which two steps are associated with the active portion of the audit when a post-installation audit is performed with an auditing tool such as Ekahau? (Choose two.)

 

A.

Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.

B.

Verify smooth roaming.

C.

Check to see if the signal level on other access points that are heard on the same channel is at least 19 dBm weaker than the access point that you are next to.

D.

Check that all channels are supported by the APs, regardless of client capabilities.

E.

Verify that the network traffic of physical data rate and packet loss meets user requirements.

 

Correct Answer: BE

 

 

QUESTION 38

An engineer is configuring an autonomous AP for RADIUS authentication. What three pieces of information must be known to configure the AP? (Choose three.)

 

A.

BVI IP address

B.

group name

C.

RADIUS IP address

D.

PAC encryption key

E.

username and password

F.

shared secret

 

Correct Answer: ACF

 

 

QUESTION 39

An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?

 

A.

225 feet

B.

80 feet

C.

150 feet

D.

100 feet

 

Correct Answer: A

 

 

QUESTION 40

An engineer is conducting a location readiness test and wants a selected point to be considered location-ready. Which three possible configurations reflect the minimum number of APs needed? (Choose three.)

 

A.

One AP is resident in each quadrant surrounding the point-in-question.

B.

One AP per 1400 sq. ft. on the map.

C.

Two APs are resident in each quadrant surrounding the point-in- question.

D.

Four APs are deployed on the floor.

E.

Three APs are within 70 feet (21 meters) of the point-in- question

F.

Three APs are deployed on the floor.

 

Correct Answer: ADE

 

 

Free VCE & PDF File for Cisco 300-360 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

Comments are closed.