Get all latest (August) Cisco 640-461 Actual Test 31-40

Ensurepass

 

QUESTION 31

A user in Cisco Unified Communications Manager Administration has been added to the Standard CCM Admin Users group, which includes the Standard CCMADMIN Administration role, but the user cannot add new users. What is the cause of this issue?

 

A.

The add user capability has been disabled for the group

B.

The incorrect group and role were assigned.

C.

The add user capability has been disabled for the role.

D.

Only theCCMAdmin user can add users.

E.

Users can be added only via LDAP

 

Correct Answer: C

Explanation:

The Standard CCM Admin Users role includes no permissions beyond logging into Cisco Unified Communications Manager Administration. The administrator must add another authorization role to define the parts of the Cisco Unified Communications Manager Administration that the user can administer.

 

The Standard CCMADMIN Administration role allows a user to access and make changes in all of Cisco Unified Communications Manager Administration.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmsys/a02mla.html

 

 

QUESTION 32

In Cisco Unified Communications Manager Native Presence, what two things is a watcher monitoring in real time? (Choose two.)

 

A.

Registration status of a specific IP phone

B.

Registration status of the hunt group

C.

Registration status of the MGCP gateway

D.

Registration status of Cisco Extension Mobility of the IP phone

E.

Status of a registered directory number

 

Correct Answer: AE

Explanation:

When you configure Presence in Cisco Unified Communications Manager Administration, an interested party, known as a watcher, can monitor the real-time status of a directory number or SIP URI, a presence entity, from the device of the watcher.

 

Cisco Unified Communications Manager controls which destinations a watcher can monitor with presence groups. A presence group contains watchers and the destinations that can be monitored by the watchers in the group. To allow watchers in one group to monitor directory numbers in other groups, you specify permission settings to allow or block (disallow) the presence request. Presence authorization works with the presence groups that are configured to ensure that a watcher has permission to monitor the status of a destination.

 

After you configure the presence groups, you apply a presence group to the following items in Cisco Unified Communications Manager Administration:

clip_image002Directory number–Presence entity for which you want status

clip_image002[1]SIP trunk–Watcher

clip_image002[2]Phone that is running SIP–Watcher

clip_image002[3]Phone that is running SCCP–Watcher

clip_image002[4]Application user–Watcher

clip_image002[5]End user–Watcher

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b02prgrp.html

 

 

QUESTION 33

Which web-based tool is used to access Cisco Unified Communications Manager CDR Analysis and Reporting?

 

A.

Cisco Unified CDR Administration

B.

Cisco Unified CM Administration

C.

Cisco Unified Reporting

D.

Cisco Unified Serviceability

 

Correct Answer: D

 

 

QUESTION 34

Which protocol is used for communication between Cisco Unity Express and Cisco Unified Communications Manager Express?

 

A.

H.323

B.

G.711

C.

MGCP

D.

Q.931

E.

SIP

 

Correct Answer: E

Explanation:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/prereq.html#wp1112818

 

 

QUESTION 35

Which utility should you use when you need to add a large number of users into Cisco Unified Communications Manager?

 

A.

Cisco Unified User Administration

B.

Application User CAPF Profile

C.

Cisco Unified Communications Manager Bulk Administration Tool

D.

Cisco Unified Telephony User Administration

 

Correct Answer: C

Explanation:

The Cisco Unified Communications Manager Bulk Administration Tool (BAT), a web-based application, performs bulk transactions to the Cisco Unified Communications Manager database. BAT lets you add, update, or delete a large number of similar phones, users, or ports at the same time. When you use Cisco Unified Communications Manager Administration, each database transaction requires an individual manual operation, while BAT automates the process and achieves faster add, update, and delete operations.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_1_2/t01batow.html

 

 

QUESTION 36

What is the quickest way to test the Cisco Unified Communications Manager configuration part of MWI to see if MWI On and MWI Off is working?

 

A.

Dial into Cisco Unity Connection from an IP phone. Enter the MWI On numbers, then enter the MWI Off numbers.

B.

Call a voice-mail user and ask them if their MWI light is on, and then disconnect the call. Call the user back and ask if the MWI light is off.

C.

In Unity Connection, issue the MWI Flash command to turn all MWI lights on, then off.

D.

If MWI numbers are dialable from an IP phone, dial the MWI On number. If the light comes on, then dial the MWI Off number to see if the light goes off.

E.

MWI cannot be tested directly from the Cisco Unified Communications Manager or an IP phone.

 

Correct Answer: D

Explanation:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080711ae3.shtml

 

 

QUESTION 37

In which scenario is it possible to have the same directory number configured on two different lines or phones and not be a shared line?

 

A.

directory number assigned to different partitions

B.

directory number assigned to the same partition

C.

directory number assigned to different calling search spaces

D.

directory number assigned to the same calling search space

 

Correct Answer: A

Explanation:

You can set up one or more lines with a shared-line appearance. A Cisco Unified Communications Manager system considers a directory number to be a shared line if it appears on more than one device in the same partition.

http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmsys/a03dn.html#wp1100362

 

 

QUESTION 38

Which statement accurately describes a calling search space?

 

A.

a group of object with similar reach ability characteristics.

B.

a calling feature that finds mobile users.

C.

a toll that is used to track calls to certain numbers.

D.

a feature that defines which partitions are reachable from a device.

 

Correct Answer: D

Explanation:

http://www.tech-recipes.com/rx/703/cisco_callmanager_partition_and_calling_search_spaces_css_explained/

QUESTION 39

An administrator is attempting to add a new user in Cisco Unified Communications Manager Administration but does not see the option to add a new user. What is the most likely cause of this issue?

 

A.

The SQL User database is not running.

B.

The system is synchronized with an LDAP server.

C.

BAT is not enabled.

D.

The administrator has the aceno user adda rights box checked.

E.

The SIP Realm is not defined in User Management.

 

Correct Answer: B

Explanation:

If you enable LDAP synchronization in Cisco Unified Communications Manager Administration, you thereby configure your system to use the LDAP corporate directory as the end user directory for Cisco Unified Communications Manager. In this scenario, you cannot add or delete users in Cisco Unified Communications Manager Administration. You add and remove end users in the corporate LDAP directory.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02ldsys.html

 

 

QUESTION 40

Which command is used to determine if an MGCP gateway is registered with a Cisco Unified Communications Manager server?

 

A.

show gateway status

B.

show isdn q931

C.

show ccm-manager

D.

show isdn status

E.

show isdn q921

 

Correct Answer: C

Explanation:

Router# show ccm-manager

 

MGCP Domain Name. router.cisco.com

Total number of host: 2

Priority Status Host

===================================================

Primary Registered 10.0.0.201

First backup Backup polling 10.0.0.50

Second backup Undefined

 

Current active Communications Manager: 10.0.0.201

Current backup Communications Manager: 10.0.0.50

Redundant link port: 2428

Failover Interval: 30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent: 00:20:18 (elapsed time. 00:00:06) Last MGCP traffic time. 00:20:18 (elapsed time. 00:00:06) Last switchover time. None

Switchback mode. Immediate

 

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf1.html#wp1027388

 

Free VCE & PDF File for Cisco 640-461 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

Comments are closed.