Get all latest (August) Cisco 640-461 Actual Test 61-70

Ensurepass

 

QUESTION 61

An engineer is installing an IP phone in a remote location. When the engineer plugs the IP phone into the network, the phone does not power up. What is the first thing that should be checked?

 

A.

Power over Ethernet switch

B.

Cisco Unified Communications Manager Server

C.

Cisco Unified Presence

D.

DHCP server

 

Correct Answer: A

 

 

QUESTION 62

When you reset an IP phone via the Cisco Unified Communications Manager Administration page, which method briefly shuts down a registered phone and brings it back up?

 

A.

drop

B.

restart

C.

reset

D.

shutdown

E.

shut and no shut

 

Correct Answer: B

 

 

QUESTION 63

An administrator is attempting to add a new IP phone to the network. The phone does not register and continues to cycle through the registration process. The administration checks and notices that the IP address assigned to the phone is not correct network. What is the cause of this issue?

 

A.

The TFTP server is reconfigured

B.

The DHCP server is giving out false IP addresses

C.

The Cisco Unified Communication Manager is down

D.

The switch port that the phone is connected to is configured with the wrong voice LAN

E.

The PSTN gateway is down

 


Correct Answer:
D

 

 

QUESTION 64

Which type of server is used to deliver the configuration to an IP phone?

 

A.

TFTP

B.

DHCP

C.

FTP

D.

Cisco Discovery Protocol

 

Correct Answer: A

 

 < /p>

 

 

 

QUESTION 65

A user exists within an office of IP phones, all of which have the same pickup group. A call comes into a phone of another office worker who is currently at lunch. What should the user do to have the call redirected to his or her phone?

 

A.

Press the “Pickup” softkey and then the line that is ringing.

B.

Press the “Call Pickup” softkey only.

C.

Press the “Call Pickup” softkey and then the line that is ringing.

D.

Press the “Pickup” softkey only.

 

Correct Answer: D

Explanation:

http://www.odessa.edu/phonehelp/7960/7960_pickup.htm

 

 

QUESTION 66

All users report that when they press the Messages button on their IP phone, nothing happens. What is the most likely cause of this issue?

 

A.

Cisco Unity Connection is not configured.

B.

The default Voicemail Profile does not have a Pilot number configured.

C.

The Voicemail Pilot does not have the VoiceMail Profile configured.

D.

The Integrated Service Engine is offline.

E.

The Voicemail Pilot is incorrect.

 

Correct Answer: B

Explanation:

The voice-mail pilot number specifies the directory number that you dial to access your voice messages. Cisco Unified Communications Manager automatically dials the voice-messaging number when you press the messages button on your phone. Each voice-mail pilot number can belong to a different voice-messaging system.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmsys/a06vmccm.html#wp1043604

 

 

QUESTION 67

If two phones share a line between them, what happens if the user of the first phone is using the line and the user of the second phone uses the Barge feature?

 

A.

The user of the first phone is notified of the Barge request.

B.

A three-way conference begins.

C.

The call is discontinued, but the first phone user and the second phone user are able to talk.

D.

The user on the first phone is knocked off the line, and the second phone user takes over the line.

 

Correct Answer: B

 

 

QUESTION 68

Can an IP phone be configured so that calls to that IP phone can be rerouted if the IP phone become unregistered?

 

A.

Yes, configuring call forward All provides this coverage

B.

No, if a phone is unregistered, the re-order tone is played to the caller

C.

Yes, configuring Call Forward Busy Internal provides this coverage

D.

Yes, configuring Call Forward Unregistered provides this coverage

E.

No. the call is dropped at the gateway

 

Correct Answer: D

 

 

QUESTION 69

When adding an IP phone to a Cisco Unified Communications Manager system, what two choices does an administrator have to add the phone to the system? (Choose two.)

 

A.

auto-registration

B.

FHSS provisioning

C.

IP phone configuration assistant

D.

manual provisioning

E.

Cisco Unified Serviceability

 

Correct Answer: AD

Explanation:

You can automatically add phones that support either SCCP or SIP to the Cisco Unified Communications Manager database by using autoregistration, manually by using the phone configuration windows, or in groups with the Bulk Administration Tool (BAT), If you do not use autoregistration, you must manually add phones to the Cisco Unified Communications Manager database.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08ipph.html #wp1101533

 

 

QUESTION 70

In which two ways can an administrator reset an IP phone that is registered with Cisco Unified Communications Manager? (Choose two.)

 

A.

Phone can be reset in Cisco Unified Communications Manager Administration.

B.

Phone can be reset in the Cisco Unified Communications Manager Express CLI.

C.

Press the * * # * * key combination on the IP phone keypad.

D.

Enter the reset ephone command in the switch.

E.

Press the * * #* key combination on the IP phone keypad.

F.

Press the ##**# key combination on the IP phone keypad.

 

Correct Answer: AC

Explanation:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a0080631683.shtml

 

Free VCE & PDF File for Cisco 640-461 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

Comments are closed.