[Free] 2018(Jan) EnsurePass Testking Juniper JN0-633 Dumps with VCE and PDF 101-110

2018 Jan Juniper Official New Released JN0-633
100% Free Download! 100% Pass Guaranteed!

Security, Professional (JNCIP-SEC)

Question No: 101

Which statement is true regarding dual-stack lite?

  1. The softwire is an IPv4 tunnel over an IPv6 network.

  2. The softwire initiator (SI) encapsulates IPv6 packets in IPv4.

  3. The softwire concentrator (SC) decapsulates softwire packets.

  4. SRX devices support the softwire concentrator and softwire initiator functionality.

Answer: C

Reference: http://www.juniper.net/techpubs/en_US/junos/topics/concept/ipv6-ds-lite- overview.html

Question No: 102

Click the Exhibit button.

– Exhibit –

Ensurepass 2018 PDF and VCE

– Exhibit –

In the exhibit, the SRX device has hosts connected to interface ge-0/0/1 and ge-0/0/6. The devices are not able to ping each other. What is causing this behavior?

  1. The interfaces must be in trunk mode.

  2. The interfaces need to be configured for Ethernet switching.

  3. The default security policy does not apply to transparent mode.

  4. A bridge domain has not been defined.

Answer: D

Question No: 103

You are asked to apply individual upload and download bandwidth limits to YouTube traffic. Where in the configuration would you create the necessary bandwidth limits?

  1. under the [edit security application-firewall] hierarchy

  2. under the [edit security policies] hierarchy

  3. under the [edit class-of-service] hierarchy

  4. under the [edit firewall policer lt;policer-namegt;] hierarchy

Answer: D Explanation:

Reference : http://forums.juniper.net/t5/SRX-Services-Gateway/Need-help-with-bandwidth- uploading-downloading-polcier/td-p/146666

Question No: 104

As an SRX administrator, you must find all encrypted sessions on an SRX Series device. Which command would you use to accomplish this task?

  1. show security flow session tunnel

  2. show security ike tunnel-map

  3. show security ike security-associations

  4. show security flow session encrypted

Answer: D

Question No: 105

Which configurable SRX Series device feature allows you to capture transit traffic?

  1. syslog

  2. traceoptions

  3. packet-capture

  4. archival

Answer: B

Question No: 106

You are asked to implement a point-to-multipoint hub-and-spoke topology in a mixed vendor environment. The hub device is running the Junos OS and the spoke devices are different vendor devices. Regarding this scenario, which statement is correct?

  1. The NHTB table must be statically defined.

  2. The NHTB table is automatically created during Phase 2.

  3. The NHTB table is automatically created during Phase 1.

  4. The NHTB table must be imported from each spoke.

Answer: A Explanation:

Reference http://www.juniper.net/techpubs/en_US/junos/topics/example/vpn-hub-spoke- nhtb-example-configuring.html

Question No: 107

You must configure a central SRX device connected to two branch offices with overlapping IP address space. The branch office connections to the central SRX device must reside in separate routing instances. Which two components are required? (Choose two.)

  1. virtual routing instance

  2. forwarding instance

  3. static NAT

  4. persistent NAT

Answer: A,C Explanation:

Reference : http://kb.juniper.net/InfoCenter/index?page=contentamp;id=KB21286

Question No: 108

What are two AppSecure modules? (Choose two.)

  1. AppDoS

  2. AppFlow

  3. AppTrack

  4. AppNAT

Answer: A,C Explanation:

Reference : Page No 2 Figure 1 http://www.juniper.net/us/en/local/pdf/datasheets/1000327-en.pdf

Question No: 109

Click the Exhibit button.

[edit security application-firewall] user@host# show

rule-sets web { rule one { match {

dynamic-application junos:HTTP;


then { permit;



default-rule { reject;



What will happen to non-HTTP traffic that matches the application-firewall policy shown in the exhibit?

  1. It will be denied because this is a blacklist policy.

  2. It will be dropped and an error will be sent to the source.

  3. It will be silently dropped.

  4. It will be allowed because this is a whitelist policy.

Answer: C

Question No: 110

Click the Exhibit button.

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:lt;;;6gt;

matched filter MatchTraffic:

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:packet [48] ipid = 5015, @423d7e9e Feb 2

09:00:02 09:00:00.1872004:CID-0:RT:– flow_process_pkt: (thd 1): flow_ctxt type 13, common flag Ox0, mbuf Ox423d7d00

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: flow process pak fast ifl 72 In_ifp fe-0/0/7.0

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: fe-0/0/7.0: gt;,

top, flag 2 syn

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: find flow: table Ox5258d7b0, hash 17008(Oxffff), sa, da, sp 51303, dp 3389, proto 6, tok


Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: no session found, start first path. in_tunnel – 0, from_cp_flag – 0

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: flow_first_create_session

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: flow first_in_dst_nat: in lt;fe-0/0/7.0gt;, out

lt;N/Agt; dst_adr, sp 51303, dp 3389

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: chose interface fe-0/0/7.0 as incoming nat if. Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_rule_dst_xlate: packet

gt; nsp2;

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_routing: call flow_route_lookup() src_ip, x_dst_ip, in ifp fe-0/0/7.0, out ifp N/A sp 51303, dp 3389, ip_proto 6, tos 0

Feb 2 09:00:02 09:00:00.1872004:CID-O:RT:Doing DESTINATION addr route-lookup Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: routed (x_dst_ip 192 168.224.30)

from untrust (fe-0/0/7.0 in 0) to ge-0/0/0.0, Next-hop:

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: policy search from zone untrust-gt; zone trust Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: policy has timeout 900

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: app 0, timeout 1800s, curr ageout 20s

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_src_xlate: src nat to returns status 1, rule/pool id 1/2. Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: dip id = 2/0,;

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: choose interface ge-0/0/0.0 as outgoing phy if

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:is_loop_pak: No loop: on ifp: ge-0/0/0.0, addr:, rtt_idx:0

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:sm_flow_interest_check: app_id 0, policy 9, app_svc_en 0, flags Ox2. not interested

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:sm_flow_interest_check: app_id 1, policy 9, app_svc_en 0, flags Ox2. not interested

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_service_lookup():

natp(Ox51ee4680): app_id, 0(0).

Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: service lookup identified service O. Referring to the exhibit, which two statements are correct? (Choose two.)

  1. The packet being inspected is a UDP packet.

  2. The incoming interface is fe-0/0/7.

  3. This traffic matches an existing flow.

  4. Source NAT is being used.

Answer: B,C

100% Free Download!
Download Free Demo:JN0-633 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass JN0-633 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

Leave a Reply