[Free] 2018(Jan) EnsurePass Testking Juniper JN0-633 Dumps with VCE and PDF 91-100

2018 Jan Juniper Official New Released JN0-633
100% Free Download! 100% Pass Guaranteed!

Security, Professional (JNCIP-SEC)

Question No: 91

What are the three types of attack objects used in an IPS engine? (Choose three.)

  1. signature

  2. chargen

  3. compound

  4. component

  5. anomaly

Answer: A,C,E

Reference: http://www.juniper.net/techpubs/en_US/idp5.0/topics/concept/intrusion- detection-prevention-idp-rulebase-attack-object-using.html

Question No: 92

Click the Exhibit button.

[edit] user@host# run show log debug

Feb3 22:04:31 22:04:31.824294:CID-0:RT:flow_first_policy_search: policy search from zone host-gt; zone attacker (Ox0,0xe4089404,0x17)

Feb3 22:04:31 22:04:31.824297:CID-0:RT:Policy lkup: vsys 0 zone(9:host) -gt; zone(10:attacker) scope: 0

Feb3 22:04:31 22:04:31.824770:CID-0:RT: -gt; proto 6

Feb3 22:04:31 22:04:31.824778:CID-0:RT:Policy lkup: vsys 0 zone(5:Umkmowm) -gt; zone(5:Umkmowm) scope: 0

Feb3 22:04:31 22:04:31.824780:CID-0:RT: -gt; proto 6

Feb3 22:04:31 22:04:31.824783:CID-0:RT: app 10, timeout 1800s, curr ageout 20s Feb3 22:04:31 22:04:31.824785:CID-0:RT: permitted by policy default-policy-00(2)

Feb3 22:04:31 22:04:31.824787:CID-0:RT: packet passed, Permitted by policy.

Feb3 22:04:31 22:04:31.824790:CID-0:RT:flow_first_src_xlate: nat_src_xlated: False, nat_src_xlate_failed; False

Feb3 22:04:31 22:04:31.824834:CID-0:RT:flow_first_src_xlate: incoming src port is: 38118 Which two statements are true regarding the output shown in the exhibit? (Choose two.)

  1. The packet does not match any user-configured security policies.

  2. The user has configured a security policy to allow the packet.

  3. The log is showing the first path packet flow.

  4. The log shows the reverse flow of the session.

Answer: C

Question No: 93

A local user complains that they cannot connect to an FTP server on the DMZ network. You investigate and confirm that the security policy allows FTP traffic from the trust zone to the DMZ zone.

What are two reasons for this problem? (Choose two.)

  1. The FTP server has no route back to the local network.

  2. No route is configured to the DMZ network.

  3. No security policy exists for traffic from the DMZ zone to the trust zone.

  4. The FTP ALG is disabled.

Answer: A,D

Question No: 94

Click the Exhibit button.

– Exhibit –

Ensurepass 2018 PDF and VCE

– Exhibit –

In the network shown in the exhibit, you want to forward traffic from the employees to ISP1 and ISP2. You want to forward all Web traffic to ISP1 and all other traffic to ISP2. However, your configuration is not producing the expected results. Part of the configuration is shown in the exhibit. When you run the show route table isp1 command, you do not see the default route listed.

What is causing this behavior?

  1. The autonomous system number is incorrect, which is preventing the device from receiving a default route from ISP1.

  2. The device is not able to resolve the next-hop.

  3. The isp1 routing instance is configured with an incorrect instance-type.

  4. The show route table isp1 command does not display the default route unless you add the exact option.

Answer: B

Reference: http://kb.juniper.net/InfoCenter/index?page=contentamp;id=KB17223

Question No: 95

You want to query User Group membership directly using the integrated user firewall services from an Active Directory controller to an SRX Series device.

Which two actions are required? (Choose two.)

  1. Configure the LDAP base distinguished name.

  2. Connect the SRX Series device and the MAG Series device in an enforcer configuration.

  3. Configure a domain name, the username and password of the domain, and the name and IP address of the domain controller in the domain.

  4. Configure the Access Control Service on the MAG Series device for local user authentication and verify that authentication information is transferred between the devices.

Answer: A,C

Question No: 96

Click the Exhibit button.

user@host# run show security flow session

Session ID: 28, Policy name: allow/5, Timeout: 2, Valid

In: -gt;; tcp, If: ge-0/0/3.0, Pkts: 1, Bytes: 64 Out: -gt;; tcp, If: ge-0/0/6.0, Pkts: 1, Bytes: 40

Your customer is unable to reach your HTTP server that is connected to the ge-0/0/6 interface. The HTTP server has an address of on port 80 internally, but is accessed publicly using interface ge-0/0/3 with the address on port 8001.

Referring to the exhibit, what is causing this problem?

  1. The traffic is originated with incorrect IP address from the customer.

  2. The traffic is translated with the incorrect IP address for the HTTP server.

  3. The traffic is translated with the incorrect port number for the HTTP server.

  4. The traffic is originated with the incorrect port number from the customer.

Answer: C

Question No: 97

Click the Exhibit button.


useu@host# run show log debug

Feb3 22:04:32 22:04:31.983991:CID-0:RT:ge-0/0/1.0:

gt;, tcp, flag 18

Feb3 22:04:32 22:04:31.983997:CID-0:RT: find flow: table 0x582738c0, hash 53561(0xffff), sa, da, sp 59028, dp 23, proto 6, tok 20489

Feb3 22:04:32 22:04:31.984004:CID-0:RT:Found: session id 0x14f98. sess tok 20489

Feb3 22:04:32 22:04:31.984005:CID-0:RT: flow got session. Feb3 22:04:32 22:04:31.984006:CID-0:RT: flow session id 85912

Feb3 22:04:32 22:04:31.984009:CID-0:RT: vector bits 0x2 vector 0x53a949e8 Feb3 22:04:32 22:04:31.984012:CID-0:RT: tcp sec check.

Feb3 22:04:32 22:04:31.984015:CID-0:RT:mbuf 0x4a82cd80, exit nh 0xa0010

Which two statements are true regarding the output shown in the exhibit? (Choose two.)

  1. The outgoing interface is ge-0/0/1.0.

  2. The packet is subject to fast-path packet processing.

  3. The packet is part of the first-packet path processing.

  4. TCP sequence checking is enabled.

Answer: C,D

Question No: 98

Which AppSecure module provides Quality of Service?

  1. AppTrack

  2. AppFW

  3. AppID

  4. AppQoS

Answer: D

Question No: 99

Click the Exhibit button.


user@host# show interfaces ge-0/0/1 {

unit 0 {

family bridge { interface-mode access; vlan-id 20;




ge-0/0/10 { unit 0 {

family bridge { interface-mode access; vlan-id 20;





user@host# show bridge-domains d1 {

domain-type bridge; vlan-id 20;



user@host# show security flow bridge


user@host# show security zones security-zone 12 {

host-inbound-traffic { system-services { any-service;



interfaces { ge-0/0/1.0; ge-0/0/10.0;



Referring to the exhibit, which statement is true?

  1. Packets sent tom the SRX Series device are sent to the RE.

  2. Packets sent to the SRX Series device are discarded.

  3. Only frames that have a VLAN ID of 20 are accepted.

  4. Only frames that do not have any VLAN tags are accepted.

Answer: C

Question No: 100

Which two configuration components are required for enabling transparent mode on an SRX device? (Choose two.)

  1. IRB

  2. bridge domain

  3. interface family bridge

  4. interface family ethernet-switching

Answer: B,C

Reference: http://kb.juniper.net/InfoCenter/index?page=contentamp;id=KB21421

100% Free Download!
Download Free Demo:JN0-633 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass JN0-633 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

Leave a Reply