[Free] 2018(Jan) EnsurePass Testking Juniper JN0-643 Dumps with VCE and PDF 121-130

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Juniper Official New Released JN0-643
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/JN0-643.html

Enterprise Routing and Switching, Professional (JNCIP-ENT)

Question No: 121 – (Topic 2)

In your 802.1X-enabled network, a RADIUS server fails to respond or authenticate a device.

On an EX Series switch, what are three supported actions? (Choose three.)

  1. Traffic can be allowed.

  2. Traffic can be denied.

  3. Traffic can be redirected to another subnet.

  4. Traffic can be redirected to another VLAN.

  5. Traffic can be redirected to another port.

Answer: A,B,D

Question No: 122 – (Topic 2)

– Exhibit –

Ensurepass 2018 PDF and VCE

– Exhibit –

Click the Exhibit button.

You have implemented a firewall-based VLAN filter to map traffic from subnet 192.168.40.0/24 to a VLAN named vlan_40. However, you have not been successful in getting the traffic mapped correctly. In addition, all traffic must be passed to the Layer 2 network.

Referring to the exhibit, which three commands are required to accomplish this behavior? (Choose three.)

  1. set interfaces ge-0/0/19.0 family ethernet-switching filter output assign_vlan

  2. set interfaces ge-0/0/19.0 family ethernet-switching filter input assign_vlan

  3. set vlans vlan_40 interface ge-0/0/19.0 mapping policy

  4. set vlans vlan_30 interface ge-0/0/19.0 mapping policy

  5. set interfaces ge-0/0/20 unit 0 family ethernet-switching port-mode trunk vlan members all

Answer: B,C,E

Question No: 123 – (Topic 2)

– Exhibit –

user@switchgt; show poe controller

Controller Maximum Power Guard Management Status Lldp index power consumption band Priority

0 130.00W 121.00W 0W Class AT_MODE Disabled

– Exhibit –

Click the Exhibit button.

A new user#39;s Class 3 IP phone is connected to port ge-0/0/7 on an EX Series switch; however, it is not working.

Referring to the exhibit, what is the cause?

  1. The model of the EX Series switch being used supports PoE only on interfaces ge-0/0/0 through ge-0/0/6.

  2. The PoE port is set to class 0.

  3. The port has been shut down because the phone#39;s power requirements exceed the PoE power budget for the switch.

  4. The guard-band is insufficient.

Answer: C

Question No: 124 – (Topic 2)

You are asked to configure graceful restart in your network. Which OSPF LSA type would you expect to see in the LSDB?

  1. Type 8

  2. Type 9

  3. Type 10

  4. Type 11

Answer: B

Question No: 125 – (Topic 2)

Which two statements are correct about L2PT? (Choose two.)

  1. L2PT requires 802.1Q tunneling enablement to effectively tunnel L2 protocols.

  2. 802.1Q tunnels all L2 protocols by default.

  3. L2PT encapsulates L2 PDUs by enabling the ingress switch to rewrite the PDUs#39; source MAC addresses before forwarding them onto the service provider network.

  4. You cannot enable L2PT and VLAN translation on the same VLAN.

Answer: A,D

Question No: 126 – (Topic 2)

NetBIOS snooping information is stored in which database on EX Series switches?

  1. RADIUS database

  2. LLDP neighbor database

  3. MAC table database

  4. routing table database

Answer: B

Question No: 127 – (Topic 2)

Which statement is true about using an OSPF import policy?

  1. Import policies are not allowed in OSPF, applying the policy will do nothing.

  2. Applying an import policy to OSPF may block normal LSA flooding.

  3. Import policies are allowed only for external route types.

  4. Applying this policy will cause a commit failure.

Answer: C

Question No: 128 – (Topic 2)

– Exhibit –

Ensurepass 2018 PDF and VCE

– Exhibit –

Click the Exhibit button.

On AS1, which two attributes are used to influence inbound traffic from the other ASs shown in the exhibit? (Choose two.)

  1. AS path

  2. MED

  3. local preference

  4. origin

Answer: A,D

Question No: 129 – (Topic 2)

A non-802.1X printer is connected to ge-0/0/0 on an EX Series switch.

Which configuration statement will authenticate the device against an authentication server?

  1. set protocols dot1x authenticator static 22:22:22:22:22:22 interface ge-0/0/0

  2. set protocols dot1x authenticator interface ge-0/0/0 supplicant single

  3. set protocols dot1x authenticator interface ge-0/0/0 mac-radius restrict

  4. set protocols dot1x authenticator interface ge-0/0/0 disable

Answer: C

Question No: 130 – (Topic 2)

– Exhibit –

{master:0}[edit protocols dot1x] user@switch# show authenticator {

authentication-profile-name my-profile; static {

00:21:cc:ba:c7:00/40 {

interface ge-0/0/12.0;

}

}

interface {

ge-0/0/12.0 { supplicant multiple; server-fail deny;

}

ge-1/0/14.0 { reauthentication 120;

server-fail vlan-name local-only;

}

ge-1/0/15.0 { supplicant multiple; mac-radius { restrict;

}

reauthentication 120; server-fail vlan-name guest;

}

}

}

– Exhibit –

Click the Exhibit button.

You just added a device on port ge-0/0/12 with the MAC address 00:21:cc:ba:c7:59. All access ports on this device are members of VLAN v20. The RADIUS server is currently not reachable.

Referring to the configuration shown in the exhibit, what happens to traffic sent from this device?

  1. The traffic is denied.

  2. The traffic is accepted and uses the guest VLAN.

  3. The traffic is accepted and uses the local-only VLAN.

  4. The traffic is accepted and uses the v20 VLAN.

Answer: D

100% Ensurepass Free Download!
Download Free Demo:JN0-643 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass JN0-643 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.